Technical specifications
Punching and shearing force: approximately 45 ton, 60 ton, and 90 ton with stroke rates from 8 to 22 strokes per minute depending on the model.
Maximum punching thickness: up to about 15–20 mm with punching diameter around 28–30 mm, and throat depth approximately 220–350 mm.
Flat bar shearing: up to about 200×15 mm on smaller models, and around 480×10 mm and 330×20 mm on the larger model.
Angle shearing: 90° cutting of equal angles up to about 120×120×12 mm on smaller units and about 140×140×12 mm on larger units, with 45° cutting capability for miter work.
Profile shearing: square bar up to roughly 35×35–45×45 mm, round bar up to about 40–50 mm, plus shearing of T‑bar, I‑beam, and C‑channel within the listed section ranges.
Notching: rectangular notches in plate thickness about 10–16 mm with widths around 45–57 mm and depth about 90 mm for corner cutting and sheet openings.
Material tensile strength rating: up to about 450 N/mm² for mild steel.
Approximate motor power: from about 4 kW up to 5.5 kW depending on machine capacity.
Dimensions and weight: roughly 1550×800×1700 mm and 1450 kg for smaller models up to about 1950×900×1930 mm and 2600 kg for the largest model.
Features and applications
Five workstations in one hydraulic ironworker: punching, flat bar shearing, angle shearing, profile shearing, and notching, saving floor space and boosting productivity in steel workshops.
Ideal for structural steel fabrication shops, bridge and pipe fabricators, and general metal fabrication plants requiring fast, accurate preparation of sections while reducing setup time.
Keywords
hydraulic ironworker machine
ايرون وركر هيدروليك قص وتخريم
hydraulic punching and shearing 45 60 90 ton
ironworker flat bar angle shearing notching
ماكينة قص وتخريم حديد متعددة المحطات
